Spinning and wheel maintenance instructions

Recently I’ve received two sets of instructions, by two of New Zealand’s best spinning wheel makers. They aren’t about setting up their particular wheels; they explain about how wheels work and how to spin on them, and one even has something on knitting. So they aren’t (for now, anyway) going in the Spinning Wheel Leaflets section, but they are too interesting not to publish.

The first is by Philip Poore, who made Pipy, Wendy, Poly and Sprite wheels. It’s titled ‘Brief spinning instructions for a double driving band spinning wheel’ and it’s here:
Pipy Spinning instructions.

He begins with instructions about preparing wool for spinning, assuming you are starting with a fleece. Then he gives excellent advice for a beginner just learning to spin, starting with treadling practice, followed by illustrated notes on how double drive bands work, including drive band thickness.

Finally we find three pages of ‘Hints for knitting handspun wool’ with acknowledgement to Bess D’Arcy Smith; she was a prominent woolcrafter and a member of the inaugural executive committee when the New Zealand Spinning Weaving and Woolcrafts Society (now Creative Fibre) was first formed in 1969-70. Her hints contain good advice about everything from fleece selection to seams and buttonholes.

The second set of instructions, by Mike and Maggie Keeves, makers of Grace wheels, is called ‘Getting the best from your spinning wheel’. It’s here:
Grace spinning instructions

It starts with a description of how a spinning wheel actually works, something that is a mystery to a surprising number of spinners:
‘A basic understanding of the following sequence of events will help you to trace any faults in your spinning wheel.

‘The motive power is supplied by your feet via the treadle. The Footman arm conveys the power to the crank which turns the wheel. The energy is stored in the rotation of the wheel and taken to the whorl by means of the drive band. The whorl and flyer are driven round drawing in and twisting the fibre and winding it onto the bobbin.’

We should all be familiar with this, because ‘Any undue friction, misalignment or drag that interferes with this sequence causes wear and tear on the machine, [and on] the spinner, and can cause the most astonishing language to be used.’

Maintenance is discussed in some detail, under the headings of the various parts, from orifice to treadle and legs, concluding with advice on lubrication.

It’s an excellent little primer, though the authors point out that it should not override manufacturers’ instructions for their products.

A big thankyou to the helpful people who have sent me these documents – you know who you are.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s